System Programming 4-51
4.2 System Programming
Emergency Dial Number Set
309
Description Stores up to five emergency numbers.
Emergency numbers are not subject to toll restriction, Account
Code – Forced/Verify - All modes or Electronic Station Lockout.
Selection • Code number: 1 – 5
• Emergency number: 24 digits (max.)
Default Code-01 = 911, Other Codes = Not stored
Programming 1. Enter 309.
Display: Emergency Code
2. Press NEXT.
Display: CODE NO? →
3. Enter a code number.
Pressing NEXT also can enter code number 1.
Display example: 01:
4. Enter an emergency number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new
number.
5. Press STORE.
6. To program another code, press NEXT or PREV, or
SELECT and enter the desired code number.
7. Repeat steps 4 through 6.
8. Press END.
Condition • Each emergency number has a maximum of 24 digits, consisting of 0–
9.
Feature References Section 3, Features
Account Code Entry
Electronic Station Lockout
Emergency Call
Toll Restriction
To Next Page
Loading...
