4.2 System Programming
Message Waiting for Another Extension
4-108 System Programming
Description Enables or disables performing the Message Waiting for Another
Extension feature.
If disabled, an extension user cannot assign the Another Extension
Message Waiting button.
Selection • Jack number: 01 – 08, ( = all jacks)
• Disable / Enable
Default All jacks – Enable
Programming 1. Enter 618.
Display: Another MW Set
2. Press NEXT.
Display: Jack NO? →
3. Enter a jack number.
Pressing NEXT also can enter jack number 01.
Display example: #01:Enable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and enter the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
Condition • To assign all jacks to the same selection, press the key in step 3. In
this case, the display will show: # :Mixed.
Feature Reference Section 3, Features
Message Waiting for Another Extension
618
To Next Page
Loading...
