4-140 System Programming
4.2 System Programming
Incoming Lamp Control
968
Description Enables or disables the Message/Ringer Lamp flashing when an
extension is in use or idle, and one of the following occurs:
– An intercom call is incoming to the extension and Call Waiting
Tone 1 is assigned.
– A doorphone call from any doorphone is incoming to the
extension.
– An outside (CO) call with Caller ID information is incoming to
the extension.
– A doorphone call from any doorphone and a doorbell/door chime
is selected.
Selection Disable (Message/Ringer Lamp — Off) /
Enable (Message/Ringer Lamp — Flashing)
Default Disable
Programming 1. Enter 968.
Display: Incoming Lamp
2. Press NEXT.
Display example: Disable
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Conditions None
Feature References Section 3, Features
Call Waiting
Caller ID Call Waiting
Doorbell/Door Chime
Doorphone Call
To Next Page
Loading...
