4.1 General Programming Instructions
4-2 System Programming
Default Setting
This system has factory default settings. If any of the programming
needs to be changed, the necessary information will be found in
Section 3, “Features”. This makes the system very simple to install
and customize as required by the customer. Any required changes
can be written in the “Programming Tables”.
Required Telephone Set
The following telephone set is required for system programming.
• Proprietary Telephone (PT): KX-TA30830
Extensions Used for Programming
Only the manager extension can perform system programming. The
extension user connected to Jack number 01 is the manager
extension.
To Next Page
Loading...
