4.2 System Programming
Call Forwarding Selection
System Programming 4-139
Description Enables or disables the Call Forwarding feature for each extension
for an outside call via an outside (CO) line assignment “Normal” in
programs [414]-[416] “Outside (CO) Line Mode — Day/Night/Lunch”.
If disabled, an extension user cannot forward the outside call even
if the user has set the Call Forwarding feature.
Selection • Jack number: 01 – 08, ( = all jacks)
• Disable / Enable
Default All jacks – Disable
Programming 1. Enter 963.
Display: FWD Selection
2. Press NEXT.
Display: Jack NO? →
3. Enter a jack number.
Pressing NEXT also can enter jack number 01.
Display example: #01:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and enter the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions • This assignment also works for an outside call via the DISA Intercept
Routing feature or when a call via DISA is received by a ring group.
• To assign all jacks to the same selection, press the key in step 3. In
this case, the display will show: # :Mixed.
Feature Reference
Section 3, Features
Call Forwarding – All Calls
Call Forwarding – Busy/No Answer
Call Forwarding – Follow Me
963
To Next Page
Loading...
