2-14 Installation
2.3.5 External Pager (Paging Equipment) Connection
Note • To adjust the sound level of the pager, use the volume control on the
amplifier.
Programming Reference
Section 4, System Programming
[106] External Paging Access Tone
Feature References Section 3, Features
Paging – All
Paging – External
One external pager (user-supplied) can be connected to the
KX-TA308 as illustrated below.
Use an EIAJ RC-6701 A plug (two-conductor,
ø 3.5 mm in diameter).
• Output impedance: 600 Ω
Maximum length of the cable
AWG 18 – 22: Under 10 m {33 feet}
To Next Page
Loading...
