4.2 System Programming
Caller ID SMDR Printout Selection
System Programming 4-133
Description Selects whether a Caller ID number is printed out or not on the
SMDR before the call is answered.
Selection Enable (printed) / Disable (not printed)
Default Disable
Programming 1. Enter 907.
Display: Caller-ID Inf.
2. Press NEXT.
Display example: Disable
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Conditions None
Feature References Section 3, Features
Caller ID
Station Message Detail Recording (SMDR)
907
To Next Page
Loading...
