Panasonic KXTA308 - ANALOG PBX - Outside (CO) Line Mode - Day;Night;Lunch

4-66 System Programming
4.2 System Programming
Outside (CO) Line Mode — Day/Night/Lunch
414–416
Description Selects the mode of an incoming outside call on each outside (CO)
line in the day, night and lunch modes. There are the following
three modes.
Normal: an incoming outside call will be received at the
extension(s) assigned in programs [408]–[410].
DIL: an incoming outside call will be received at the assigned
extension.
DISA1: an incoming outside call will be received at an extension
through the DISA feature. A caller will hear a tone.
Selection • Outside (CO) line number: 1 – 3, ( = all outside (CO) lines)
•
Normal / DIL + extension jack number (01 through 08) / DISA1
Default All outside (CO) lines – Normal — Day/Night/Lunch
Programming 1. Enter a program address (414 for day, 415 for night or 416
for lunch).
Display example: CO Day/Mode
2. Press NEXT.
Display: CO NO? →
3. Enter an outside (CO) line number.
Pressing NEXT also can enter outside (CO) line number 1.
Display example: CO 1:Normal
4. Keep pressing SELECT until the desired selection is
displayed and if “DIL” is selected, enter the extension jack
number.
5. Press STORE.
6. To program another outside (CO) line, press NEXT or
PREV, or SELECT and enter the desired outside (CO) line
number.
7. Repeat steps 4 through 6.
8. Press END.