4-128 System Programming
4.2 System Programming
Caller ID Area Code Assignment
901
Description Assigns the required area code when using the Caller ID feature.
By assigning the area code, the system records the caller’s phone
number modified by programs [902] “Caller ID Modification for
Local Calls” and [903] “Caller ID Modification for Long Distance
Calls”.
Selection • Code number: 1 – 5
• Area code: 6 digits max.
Default All codes – Not stored
Programming 1. Enter 901.
Display: CID Area Code
2. Press NEXT.
Display: CODE NO? →
3. Enter a code number.
Pressing NEXT also can enter code number 1.
Display example: CODE-01:......
4. Enter an area code.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new area
code.
5. Press STORE.
6. To program another code number, press NEXT or PREV, or
SELECT and enter the desired code number.
7. Repeat steps 4 through 6.
8. Press END.
Condition • The area code can be six digits long. Valid numbers are from 0 to 9.
Feature References Section 3, Features
Call Log, Incoming
Caller ID
To Next Page
Loading...
