4.2 System Programming
Caller ID Call Waiting Time
4-134 System Programming
Description Assigns the length of the second caller information display timer.
The caller’s information flashes on the display of a proprietary
telephone during the assigned time when a caller’s information is
sent from the Central Office with a Call Waiting tone.
Selection Time: 10 sec / 20 sec / 30 sec / 40 sec / 60 sec / 120 sec
Default 30 sec
Programming 1. Enter 908.
Display: C.W CID Time
2. Press NEXT.
Display example: Time: 30sec
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Conditions • If a proprietary telephone user does not talk to the caller on the display
(flashing) by pressing the FLASH/RECALL button during the assigned
time, the caller’s information will be recorded automatically on the
telephone and the Caller ID Indication button indicator lights.
• The TRANSFER button and HOLD button do not work during the
assigned time.
Feature Reference Section 3, Features
Caller ID Call Waiting
908
To Next Page
Loading...
