4.2 System Programming
Extension Number Assignment
009
System Programming 4-19
Description Assigns an extension number to each extension.
Selection • Jack number: 01 – 08
• Extension Number: 100 – 199
Default Jack 01 – 08 = EXT 101 – 108
Programming 1. Enter 009.
Display: Extension No Set
2. Press NEXT.
Display: Jack NO? →
3. Enter a jack number.
Pressing NEXT also can enter jack number 01.
Display example: Jack01:EXT101
4. Enter an extension number.
To change the current entry, press CLEAR and enter the new
number.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and enter the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions • Program [604] “Extension Name Setting” is used to name the
extensions.
• An extension number which has been assigned to one jack cannot be
used for another jack. If an assigned number is entered, an alarm tone
will be heard and the entry is invalid.
Feature References Section 3, Features
Display, Call Information
Intercom Calling
To Next Page
Loading...
