3-22 Features
C 3 Features
Call Hold – Intercom
Description This is used to place an intercom call on hold. The held call can be
retrieved by the user who held it or by any other extension.
Conditions • Only one intercom call can be placed on hold (up to ten calls in the
system – Call Park). With a proprietary telephone, outside calls and one
intercom call can be placed on hold at the same time. With a single line
telephone, either one outside or intercom call can be held.
• If a call on hold is not retrieved within a pre-assigned period of time,
Hold Alarm/Hold Recall occurs.
Programming References
Section 4, System Programming
[104] Hold Mode Selection
[200] Hold Recall Time
Feature References Section 3, Features
Call Park
Hold Alarm/Hold Recall
Operation Reference Telephone Features
— User Manual Call Hold
To Next Page
Loading...
