System Programming 4-39
4.2 System Programming
Transfer Recall Time
201
Description Assigns the length of the transfer recall timer. If a transferred call is
not answered within the programmed time, the call will be returned
to the person who initiated the transfer.
Selection Time: 15 sec / 30 sec / 1 min / 2 min (seconds/minutes)
Default 30 sec
Programming 1. Enter 201.
Display: Transfer Recall
2. Press NEXT.
Display example: Time:30 sec
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Conditions None
Feature Reference Section 3, Features
Call Transfer, Unscreened — to Extension
To Next Page
Loading...
