System Programming 4-41
4.2 System Programming
Pickup Dial Delay Time
203
Description Sets the length of time for the Pickup Dialing feature. If the
telephone user lifts the handset, the programmed party will be
called when the time expires. This delay gives the user an
opportunity to enter numbers before automatic dialing occurs.
Selection 1 sec / 2 sec / 3 sec / 4 sec (seconds)
Default 3 sec
Programming 1. Enter 203.
Display: Pickup Dial Time
2. Press NEXT.
Display example: PUD Time:3sec
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Conditions None
Feature Reference Section 3, Features
Pickup Dialing
To Next Page
Loading...
