4-76 System Programming
4.2 System Programming
Local Carrier-Based Voice Mail Signaling Assignment
435
Description Selects the type of signal that the system expects to receive from
the telephone company’s voice mail service.
This signal indicates the presence or absence of voice mail
messages in the mailbox.
Selection • Outside (CO) line number: 1 – 3, ( = all outside (CO) lines)
• Disable / Stutter (Stutter dial tone method) / FSK (FSK method)
Default All outside (CO) lines – Disable
Programming 1. Enter 435.
Display: CO VM Type
2. Press NEXT.
Display: CO NO? →
3. Enter an outside (CO) line number.
Pressing NEXT also can enter outside (CO) line number 1.
Display example: CO 1:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another outside (CO) line, press NEXT or
PREV, or SELECT and enter the desired outside (CO) line
number.
7. Repeat steps 4 through 6.
8. Press END.
Condition • To assign all outside (CO) lines to the same selection, press the key
in step 3. In this case, the display will show: CO :Mixed.
Feature Reference Section 3, Features
Local Carrier-Based Voice Mail Service
To Next Page
Loading...
