4.2 System Programming
Intercept Time for Internal DISA
4-90 System Programming
Description Selects the time that the system waits for DTMF signals when a call
is received via the internal DISA. If the system does not receive the
DTMF signals within the assigned period of time, the call will be
disconnected or sent to extensions programmed in [408]–[410]
according to program [510].
Selection 3 sec / 6 sec / 9 sec (seconds)
Default 3 sec
Programming 1. Enter 515.
Display: Internal DISA
2. Press NEXT.
Display example: Time: 3 sec
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
Conditions None
Feature Reference Section 3, Features
Direct Inward System Access (DISA)
515
To Next Page
Loading...
