System Programming 4-117
4.2 System Programming
Doorphone Chime Pattern Selection
712
Description Assigns an incoming doorphone call chiming pattern for each
doorphone. There are eight patterns as follows:
* The chime pattern occurs only once during the doorphone ringing
time.
Selection • Doorphone number: 1 – 2, ( = all doorphones)
• Pattern 1 / Pattern 2 / Pattern 3 / Pattern 4 / Pattern 5 /
Pattern 6 / Pattern 7 / Pattern 8
Default All doorphones — Pattern 1
Programming 1. Enter 712.
Display: Chime Pattern
2. Press NEXT.
Display: Door NO? →
3. Enter a doorphone number.
Pressing NEXT also can enter doorphone number 1.
Display example: DP-1:Pattern 1
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
To Next Page
Loading...
