Panasonic KXTA308 - ANALOG PBX - Page 312

4-120 System Programming
4.2 System Programming
SMDR RS-232C Communication Parameters (contd.)
800
6. Keep pressing SELECT until the desired selection is
displayed.
7. Press STORE.
8. Press NEXT to program the word length.
Display example: Word Length:8bit
9. Keep pressing SELECT until the desired selection is
displayed.
10. Press STORE.
11. Press NEXT to program the parity bit.
Display example: Parity:Mark
12. Keep pressing SELECT until the desired selection is
displayed.
13. Press STORE.
14. Press NEXT to program the stop bit.
Display example: Stop Bit:1bit
15. Keep pressing SELECT until the desired selection is
displayed.
16. Press STORE.
17. Press END.
Condition • The following combinations are invalid.
Feature Reference
Section 3, Features
Station Message Detail Recording (SMDR)
Parity
Mark
Space
Space
8
8
8
2
1
2
Word Length Stop Bit