Peri Trio - A12 Stopend formwork; Stopend Panel TR 24; Timbers and filler plywood

36
AA
BB
A-A
B-B
54
24
25
55
TRIO Panel Formwork
Instructions for Assembly and Use – Standard Configuration
A12 Stopend formwork
Stopend Panel TR 24
For wall thickness 24 cm
(Fig. A12.01)
– The Stopend Panel TR 24 (54) can
also be used as a wall panel.
– The Panel TR 30 can be used as
stopend panel for wall thickness
30 cm (not shown here).
Timbers and filler plywood
For all wall thicknesses
The concrete pressure from the stopend
formwork is transferred with the TRIO
Stopend Tie TS and Walers 85 to the
TRIO Panels.
For use with panel widths < 2.40 m
at the wall end.
(Fig. A12.02)
Required components:
– 3 x Waler 85 (24)
– 6 x Stopend Tie TS (25) with Wingnut
Pivot Plate DW 15
– 6 x Top Tie Bracket-2 AH (55) with
tie set
For use with panel width = 2.40 m at
the wall end (not shown here).
Required components:
– 3 x Waler 85 (24)
– 6 x Stopend Tie TS (25) with Wingnut
Pivot Plate DW 15.
Fig. A12.01
Fig. A12.02
AuV TRIO EX.indb 36 11.10.17 09:47