2
Overview
Key
Pictogram | Definition
Safety instructions
Note
Load-bearing point
Visual check
Tip
Safety helmet
Safety shoes
Safety gloves
Safety glasses
Personal protective equipment
to prevent falling from a height
(PPE)
Misapplication
Dimension specifications
Dimensions are usually given in cm.
Other units of measure, e.g. m, are
shown in the illustrations.
Conventions
Instructions are numbered with:
1. ....., 2. ....., 3. .....
The result of an instruction is shown
by:
Position numbers are clearly provided
for the individual components and are
given in the drawing, e.g. 1, in the
text in brackets, for example (1).
Multiple position numbers, i.e. alter-
native components, are represented
with a slash, e.g. 1 / 2.
Arrows
Arrow representing an action
Arrow representing a reaction of an action*
Forces
Presentational reference
The illustration on the front cover of
these instructions is understood to be
a system representation only.
The assembly steps presented in these
Instructions for Assembly and Use are
shown in the form of examples with
only one component size. They are
correspondingly valid for all component
sizes contained in the standard configu-
ration.
For a better understanding, detailed
illustrations are partly incomplete. The
safety installations which have possibly
not been featured in these detailed
drawings must nevertheless still be
available.
TRIO Panel Formwork
Instructions for Assembly and Use – Standard Configuration
* If not identical to the action arrow.
AuV TRIO EX.indb 2 11.10.17 09:44
To Next Page
Loading...
