VR2 CONTROL SYSTEM
SK77898/2
PG DRIVES TECHNOLOGY
92
Control Panel
Joystick
Joystick Knob
Option
DUAL MODULE USER CONTROLS
Control Panel Details
2.1 Joystick
This controls the speed and direction of the wheelchair. Push the joystick in the direction
you wish to go. The further you push it, the faster the speed. Releasing the joystick
stops the wheelchair and automatically applies the brakes.
When in actuator control mode, pushing the joystick left and right will toggle selection
between the available actuators. Operating the joystick in the forward and reverse
directions will adjust the selected actuator.
2. Controls
Refer to the following illustration for the dual module control layout.