PG Drives Technology VR2 series User Manual

VR2 CONTROL SYSTEM
SK77898/2
PG DRIVES TECHNOLOGY
48
Speeds - Section 2
Acceleration
Deceleration
Turn Acceleration
Turn Deceleration
Forward Speed
Reverse Speed
Turning Speed
Power
Number of Drive Profiles
Minimum Acceleration
Minimum Deceleration
Minimum Turn Acceleration
Minimum Turn Deceleration
Actuators - Section 3
Number of Actuators
Actuator 1 End Force
Actuator 1 Current Limit Timeout
Actuator 2 End Force
Actuator 2 Current Limit Timeout
Actuator End stop bleep.
Actuator Selection with Joystick
Operation - Section 4
Sleep Timer
Joystick Throw
Invert Joystick
Steer Correct
Switch Bleep Volume
Speed Adjustment while Driving
Battery - Section 5
Low Battery Flash
Cable Resistance
Calibration Factor
Low Battery Alarm
Low Voltage Cut Out
Low Voltage Time
Inhibit  Section 6
Inhibit 2 Threshold Levels
Inhibit 2 Speed Limit Bands
Inhibit 2 Operation
Inhibit 2 Debounce
Seat Reversal
Inhibit 3 Threshold Levels
Inhibit 3 Speed Limit Bands
Inhibit 3 Operation
Inhibit 3 Debounce
Inhibit 1 Alarm
Inhibit 2 Alarm
Inhibit 3 Alarm
Inhibit Actuator Channel 1 Up/Down
Inhibit Actuator Channel 2 Up/Down
General  Section 7
Fast Brake rate
Soft Stop
Front Wheel Drive Rate
Soft Reverse Deceleration Rate
Reverse Driving Alarm
Brake Disconnect Alarm
K10
Lock Function Enabled
Brake Fault Detect
Brake Voltage
Motor  Section 8
Current Limit Max
Current Foldback Threshold
Current Foldback time
Current Foldback level
Current Foldback Temperature
Current Limit Min
Motor Compensation
Invert M1 Direction
Invert M2 Direction
1.3 Parameters
The parameters have been separated into workable groups for easy referencing.

PG Drives Technology VR2 series Specifications

General

Brand	PG Drives Technology
Model	VR2 series
Category	Control Systems
Language	English