PG Drives Technology VR2 series User Manual

VR2 CONTROL SYSTEM
SK77898/2
PG DRIVES TECHNOLOGY
XII
About this manual
This manual is split into 6 chapters which are in turn split into separate sections. Each
chapter deals with a specific issue.
Chapter 1 - Operation
This chapter deals with the controls and functionality of the VR2 Control System.
Chapter 2 - Installation
This chapter deals with the mounting, connection, wiring and setup procedures for
the VR2 Control System.
Chapter 3 - Programming
This chapter gives an overview of the programmable parameters within the VR2
Control System.
Chapter 4 - Lighting
This chapter deals with the operation, installation and programming changes created
with the VR2-L Control System.
Chapter 5 - Dual Attendant Module
This chapter deals with the operation and installation changes created with the
VR2-D Control System.
Chapter 6 - Servicing & Diagnostics
This chapter deals with the servicable sections of the VR2 control system.
Chapter 7 - Warning Summary
Lists all the Warnings used within the manual.
Chapter 8 - Specifications
Lists all the Electrical Specifications of the VR2 Control System.
ICONS
PG Drives Technology will be abbreviated to PGDT throughout the manual.
Throughout the manual icons are used to draw the readers attention.
The icons used are:
Note - A general point for best practice.
Caution - A point of safety which if ignored could result in
damage to the control system or the vehicle.
Warning - A point of safety which if ignored could cause
injury to the individual.

PG Drives Technology VR2 series Specifications

General

Brand	PG Drives Technology
Model	VR2 series
Category	Control Systems
Language	English