PG Drives Technology VR2 series User Manual

VR2 CONTROL SYSTEM
SK77898/2
PG DRIVES TECHNOLOGY
64
6.10 Inhibit 1: Alarm
This parameter sets whether there is an audible alarm given if VR2 Inhibit 1 is active.
Inhibit 1 is the inhibit associated with the off-board charging socket on the front face
of the VR2. The parameter can be set to on or off.
On Means an audible alarm will sound when Inhibit 1 is active.
Off Means there will be no alarm.
6.11 Inhibit 2: Alarm
This parameter sets whether there is an audible alarm given if VR2 Inhibit 2 is active.
Inhibit 2 is normally the inhibit associated with the actuator functions of the VR2. The
parameter can be set to on or off.
On Means an audible alarm will sound when Inhibit 2 is active.
Off Means there will be no alarm.
6.12 Inhibit 3: Alarm
This parameter sets whether there is an audible alarm given if VR2 Inhibit 3 is active.
Inhibit 3 is normally the inhibit function associated with the on-board charger
connections of the VR2. The parameter can be set to on or off.
On Means an audible alarm will sound when Inhibit 3 is active.
Off Means there will be no alarm.
6.13 Actuator Channel 1 Up Inhibit and Actuator Channel 1 Down
Inhibit
This section must be read in conjunction with section 6.1. Note Band 1 and Band 2
have no effect on actuator inhibits.
These parameters allow Actuator Channel 1 to be inhibited, in either or both directions,
via, either or both, the Inhibit 2 and/or Inhibit 3 inputs.
There are a total of 8 parameters that can be set:
Actuator Channel 1 Up:
Inhibit in Inhibit 2 Band 0
Inhibit in Inhibit 2 Band 3
Inhibit in Inhibit 3 Band 0
Inhibit in Inhibit 3 Band 3
Actuator Channel 1 Down:
Inhibit in Inhibit 2 Band 0
Inhibit in Inhibit 2 Band 3
Inhibit in Inhibit 3 Band 0

PG Drives Technology VR2 series Specifications

General

Brand	PG Drives Technology
Model	VR2 series
Category	Control Systems
Language	English