EasyManuals Logo

PG Drives Technology VR2 series User Manual

PG Drives Technology VR2 series
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
PG DRIVES TECHNOLOGY
3
CHAPTER 1 - OPERATION
SK77898/2
1 Introduction
The relevant contents of this chapter should be included in the wheelchair operating
guide. Further copies are available from PGDT in either written or disk (Adobe PDF)
format. Copies should not be made without the express permission of PG Drives
Technology.
The operation of the VR2 varies dependent on programming. This chapter covers all
types of operation. It is the responsibility of the wheelchair manufacturer to ensure
that only the relevant sections of this chapter are included in the wheelchairs
operating manual.
The operation of the VR2 wheelchair control system is simple and easy to understand.
The control system incorporates state-of-the-art electronics, the result of many years
of research, to provide you with ease of use and a very high level of safety. In
common with other electronic equipment, correct handling and operation of the
unit will ensure maximum reliability.
Please read this chapter carefully - it will help you to keep your wheelchair reliable
and safe.
2 General
2.1 Handling
Avoid knocking your control system and especially the joystick. Be careful not to
strike obstacles with the control system or joystick when you drive. Never drop the
control system.
When transporting your wheelchair, make sure that the control system is well protected.
Avoid damage to cables.
2.2 Operating Conditions
Your control system uses industrial-grade components throughout, ensuring reliable
operation in a wide range of conditions. However, you will improve the reliability of
the control system if you keep exposure to extreme conditions to a minimum.
Do not expose your control system or its components to damp for prolonged periods.
If the control system becomes contaminated with food or drink clean it off as soon
as possible.
2.3 Cleaning
Clean the control system and the joystick with a cloth dampened with diluted
detergent. Be careful when cleaning the joystick.
Never use abrasive or spirit-based cleaners.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PG Drives Technology VR2 series and is the answer not in the manual?

PG Drives Technology VR2 series Specifications

General IconGeneral
BrandPG Drives Technology
ModelVR2 series
CategoryControl Systems
LanguageEnglish