PG DRIVES TECHNOLOGY
53
CHAPTER 3 - PROGRAMMING
SK77898/2
This percentage of the Deceleration value occurs when the VR2 speed setting is at
1.
See following example.
Deceleration = 80 and Minimum Deceleration = 25%
Deceleration at step 1 = 25% of 80 = 20
Speed settings 2, 3 and 4 will interpolate linearly between 20 and 80
Deceleration at step 2 = 35
Deceleration at step 3 = 50
Deceleration at step 4 = 65
2.12 Minimum Turn Acceleration
Adjusts the minimum value for turning acceleration of the wheelchair.
Adjustable in increments of 1% of the Turn Acceleration value.
This percentage of the Turn Acceleration value occurs when the VR2 speed setting
is at 1.
See following example.
Turn Acceleration = 80 and Minimum Turn Acceleration = 25%
Turn Acceleration at step 1 = 25% of 80 = 20
Speed settings 2, 3 and 4 will interpolate linearly between 20 and 80
Turn Acceleration at step 2 = 35
Turn Acceleration at step 3 = 50
Turn Acceleration at step 4 = 65
2.13 Minimum Turn Deceleration
Adjusts the minimum value for turning deceleration of the wheelchair.
Adjustable in increments of 1% of the Turn Deceleration value.
This percentage of the Turn Deceleration value occurs when the VR2 speed setting
is at 1.
See following example.
Turn Deceleration = 80 and Minimum Turn Deceleration = 25%
Turn Deceleration at step 1 = 25% of 80 = 20
Speed settings 2, 3 and 4 will interpolate linearly between 20 and 80
Turn Deceleration at step 2 = 35
Turn Deceleration at step 3 = 50
Turn Deceleration at step 4 = 65
To Next Page
Loading...
Need help?
General