PG DRIVES TECHNOLOGY
139
CHAPTER 6 - SPECIFICATIONS
SK77898/2
1 Electrical Specifications
Supply Voltage: 24Vdc
Operating Voltage: 16Vdc to 35Vdc
Peak Voltage: 35Vdc
Reverse Battery Current:40Vdc
PWM Frequency: 20kHz ± 0.5%
Brake Voltage: 12Vdc or 24Vdc
Brake Current: 100mA min.
1A max.
Charger Connector: Use only Neutrik NC3MX
Batt. Charging Current: 12Arms max.
Actuator Current: 12A max.
Maximum Drive Current:
VR2 40 40A
VR2 50 50A
VR2 60 60A
VR2 70 70A
Moisture Resistance: IPx4
Operating Temperature: -25°C to +50°C
Storage Temperature: -40°C to +65°C
EMC tested on sample wheelchair:
Susceptibility: Tested at 30V/m to EN12184 and ANSI/ RESNA
requirements
Emissions: To EN55022 Class B
ESD: IEC801 part 2
To Next Page
Loading...
Need help?
General