PG Drives Technology VR2 series User Manual

PG DRIVES TECHNOLOGY
5
CHAPTER 1 - OPERATION
SK77898/2
3.1 On/Off Button and Battery Gauge
The on/off button applies power to the control system electronics, which in turn supply
power to the wheelchair s motors. Do not use the on/off button to stop the wheelchair
unless there is an emergency. (If you do, you may shorten the life of the wheelchair
drive components).
The battery gauge shows you that the wheelchair is switched on. It also indicates the
operating status of the wheelchair. Details are given in section 8.0.
On/Off Button
VR2 CONTROL BUTTONS
Maximum Speed / Profile Indicator
Battery Gauge
Horn Button
Speed / Profile Decrease Button
Actuator Buttons
Speed / Profile Increase Button

PG Drives Technology VR2 series Specifications

General

Brand	PG Drives Technology
Model	VR2 series
Category	Control Systems
Language	English