Philips Respironics SimplyGo Mini User Manual

31
SimplyGo Mini User Manual
English
3� You can view the type of alarm that occurred and the start time and
date of the alarm on the Alarm Log screen�
4� Press the < and > buttons to navigate through the list of alarms in the
log history� The log will list the 16 most recent alarms�
Notes:
• The alarm log is maintained between device Power Off and Power On
cycles (the time of Power Off is not logged)�
• The most recent alarm events in the log from the current Power On
session may be lost if the device experiences a total loss of power and
improperly shuts down�
• The alarm log maintains the most recent 16 alarms and will discard the
oldest data once its memory is full and a new alarm occurs� If less than 16
alarms have occurred, N/A will appear on some of the alarm screens�
Change the Language Selection Setting
To select a new language on the SimplyGo Mini
device, complete the following steps:
1� From the Home screen, click on the Tools icon to
access the Device Tools menu�
2� Press the page left or page right (< >) buttons
to scroll through the menus until the language
selection menu appears, shown at right�
3� Press the Language Selection icon, and then press the up and down
arrows (∧ ∨) to scroll through the list until the desired language appears,
as shown below�

Philips Respironics SimplyGo Mini Specifications

General

Battery Duration (Standard Battery)	Up to 4.5 hours
Battery Life	Up to 4.5 hours with standard battery, up to 9 hours with extended battery
Oxygen Concentration	87% to 96% at all settings
Pulse Dose Settings	1 to 5
Recharge Time (Standard Battery)	Approximately 4 hours
Recharge Time (Extended Battery)	8 hours
Operating Altitude	Up to 10, 000 feet (3048 meters)
Sound Level	43 dBA (at pulse dose setting 2)
Operating Temperature	5°C to 40°C (41°F to 104°F)
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Altitude Range	Up to 10, 000 feet (3048 meters)
Weight	5 lbs (2.3 kg) with standard battery
Humidity Range	15% to 95% non-condensing