3. To enable, tap the slider next to Cost Account and slide it to the right so that it turns blue.
l
To assign a cost account to every label, tap the check box for Require cost account for all
shipments.
4. Tap Apply.
Once you turn cost accounts on, you will need to have at least 1 cost account to print a shipping label.
Turning on address autofill for shipping labels
Autofill automatically fills in the address fields as you start to enter an address. This makes it easier to
enter addresses when creating shipping labels.
1. Tap Settings.
2. Scroll down to Shipping Settings.
3. Tap SendPro Experimental Features.
4. Tap on the check box for Use Geosearch.
Managing Shipping Labels
Pitney Bowes Operator Guide April 2022 126
To Next Page
Loading...
