2. Slide the envelope flap under the edge of the feed deck when inserting an envelope. Otherwise,
the moistener cannot wet the flap.
3. If the moistener tank is full, and your envelopes are still not sealing correctly, clean or replace
your moistener brush and wick.
Preventing envelope feeding problems
Ensure you feed envelopes correctly to help prevent feeding problems.
Feeding mail
1. For your first envelope, hold the far edge of the envelope against the back wall of the feeder.
2. Slide the envelope into the feeder until you feel it touch the rollers. You hear the motor begin. Do
not release the envelope until the feeder grabs it to pull it through the device.
Maintenance
Pitney Bowes Operator Guide April 2022 195
To Next Page
Loading...
