Confirming your meter update
To check if you have the latest rates for Envelope Printing:
1. Locate your Product Code Number (PCN) and 7-digit serial number.
2. Go to the Confirm your meter update web page.
3. Select your PCN from the menu and enter the serial number in the field provided.
4. Click Confirm Meter Update.
Changing the default refill amount for printing postage
Change the default refill amount to store an amount you want to refill your device with.
You can set the default refill amount during installation or change it at later time.
There are two ways to change the default refill amount:
From the Home Screen:
1. Tap Settings.
2. Scroll down to the Envelope Printer Settings section.
3. Tap Postage Refills.
4. Tap the box under Default refill amount.
5. Tap the back key to remove the existing amount. You may need to tap the key multiple times to
clear the amount.
6. Enter the new amount.
7. Tap Apply.
8. Tap the back arrow to return to the Home screen.
From Envelope Printing:
1. Tap Envelope Printing from the Home screen.
2. Tap Postage Balance.
3. Tap Refill Settings.
4. Tap the box under Default refill amount.
Managing Printing on Envelopes
Pitney Bowes Operator Guide April 2022 162
To Next Page
Loading...
