1. Check the level of E-Z Seal® in your moistener tank (1).
2. Add enough E-Z Seal® to bring the sealant level up to the bottom of the fill hole (2). Do not
overfill the tank.
3. If the tank is empty, allow 30 minutes for the moistener brush and wick to get completely wet.
Avoiding envelope sealing issues
Prevent sealing issues by:
l
Having enough sealant in the moistener tank.
l
Placing the envelope correctly on the feed deck.
l
Maintaining the wick or brush in the moistener.
1. Check the level of sealant in the moistener tank. Add more if required.
Maintenance
Pitney Bowes Operator Guide April 2022 194
To Next Page
Loading...
