5. Tap Weight.
6. Tap Scale.
7. Place the envelope on the scale. You must do this before the next step or else Apply remains
inactive.
8. Tap Class then select the class of mail you want.
9. Tap Graphic then select a graphic, if necessary.
10. Tap Apply to continue.
11. Insert the envelope into the device. The device prints the postage .
Important: If the moistener tank is full and your envelopes do not seal correctly, clean or replace the
moistener brush and wick.
Filling the moistener tank
Your device will need refills of E-Z Seal® in order to seal envelopes. Follow these steps to fill the
moistener tank.
Quick start guide
Pitney Bowes Operator Guide April 2022 52
To Next Page
Loading...
