EasyManua.ls Logo

Pitney Bowes SendPro C - Lithium Ion Battery; Agency Compliance Information; Important Safety Notes

Pitney Bowes SendPro C
226 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SendPro C, SendPro+ (Model 2H00 and 8H00)
Power requirements: 100-240 VAC, 50/60 Hz, 1.0 A
SendPro C (All models)
l
Operating Temperature: 55°F (13°C) to 95°F (35°C)
l
Sound Level: Less than or equal to 70 dBA re 20 micro Pascal in accordance with ISO 7779,
ISO 3744, or ISO 3741.
Lithium Ion Battery
This product contains a lithium ion battery. The battery must be recycled or disposed of properly. If you
are leasing this product, you must return it to Pitney Bowes. Alternatively, contact your local waste
disposal or recycle facility for instructions on how to dispose of it properly.
Agency Compliance Information
Agency Compliance Information can be found in the product’s user guide. The user guide is available
for download at: http://www.pitneybowes.com/us/support.
Important Safety Notes
Follow the normal safety precautions for all office equipment.
l
Please read all instructions before you attempt to operate the system. Save these instructions
for future use.
l
Use only Pitney Bowes-approved supplies, in particular aerosol dusters. Improper storage and
use of aerosol dusters or flammable aerosol dusters can cause an explosive-like condition that
could result in personal injury and/or property damage. Never use aerosol dusters labeled
flammable and always read instructions and safety precautions on the duster label.
l
Use the power cord supplied with the machine and plug it into a properly grounded wall outlet
that's located near the machine and easily accessible. Failure to properly ground the machine
can result in severe personal injury and/or fire.
Safety
Pitney Bowes Operator Guide April 2022 220

Table of Contents

Other manuals for Pitney Bowes SendPro C

Related product manuals