1. Tap Envelope Printing on the Home screen.
2. Scroll down and tap Print Mode.
3. Tap Postage Correction.
4. Tap Apply.
5. Tap the postage amount.
6. Use the keypad to enter the additional postage amount.
7. Tap the check mark when done.
8. Turn your envelope over to the blank side.
9. Place the envelope or envelopes on the feed deck. Depending on the SendPro C model you
have, feed the envelopes manually or tap Start to feed the envelopes.
The word "Correction" appears on the postage mark:
Re-dating your mail
Watch this video or follow the instructions below to learn how to redate your mail.
Printing on envelopes
Pitney Bowes Operator Guide April 2022 148
To Next Page
Loading...
