NOTE: If your device's model number is 8H00 or 9H00 it will remember the Static
IP information even if you switch back to DHCP and then back again. This information includes
IP Address, Netmask, Gateway and DNS Address as well as the proxy information.
Setting up a wireless (Wi-Fi) network connection
You can connect your SendPro C, SendPro+ with a wireless network connection.
1. Tap Settings.
2. Tap Wi-Fi in the Device & Network section.
3. Choose your Wi-Fi network from the list. Tap Add Network if your Wi-Fi network does not
appear.
4. Enter your Wi-Fi password.
Tip: Use the show password option to make sure that you enter your password correctly.
5. Tap Advanced Options if your network requires advanced network settings such as a Static IP
address:
l
To set up a Static IP address:
a. Select the IP Setting menu and choose Static.
b. Tap on the line and enter the value provided by your IT department.
c. Tap the > in the green circle.
Connecting to a hidden Wi-Fi network
Add a network when you want to connect using Wi-Fi and your network is not present in the Wi-Fi list.
1. Tap Settings.
2. Tap Wi-Fi in the Device & Network section to see a list of available networks.
Connectivity information
Pitney Bowes Operator Guide April 2022 65
To Next Page
Loading...
