Planet IGS-604HPT-M12 User Manual

User’s Manual of IGS-604HPT-M12
188
Contro
ls the unit of measure for the queue shaper rate as "kbps" or "Mbps".
The default value is "kbps".
 Queue Shaper Unit
 Queue Shaper Excess
Controls whether the queue is allowed to use excess bandwidth.
Contro
ls the weight for this queue.
This value is restricted to 1-100. This parameter is only shown if "Scheduler
Mode" is set to "Weighted".
The default value is "17".
 Queue Scheduler
Weight
Sho
ws the weight in percent for this queue. This parameter is only shown if
"Scheduler Mode" is set to "Weighted".
 Queue Scheduler
Percent
Contro
ls whether the port shaper is enabled for this switch port.
 Port Shaper Enable
Contro
ls the rate for the port shaper.
This value is restricted to 100-1000000 when the "Unit" is "kbps", and it is
restricted to 1-13200 when the "Unit" is "Mbps".
The default value is 500.
 Port Shaper Rate
Contro
ls the unit of measure for the port shaper rate as "kbps" or "Mbps".
The default value is "kbps".
 Port Shaper Unit
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
: Click to undo any changes made locally and return to the previous page.

Planet IGS-604HPT-M12 Specifications

General

Brand	Planet
Model	IGS-604HPT-M12
Category	Network Router
Language	English