Planet MGSW-24160F - System Reboot; System Restore Default; System Load

User’s Manual of MGSW-24160F
308
To change CLI title:
Switch/>system prompt MGSW-24160F
MGSW-24160F/>
System Reboot
Description:
Reboot the system.
Syntax:
System Reboot
Example:
To reboot device without changing any of the settings:
Switch/>system reboot
System Restore Default
Description:
Restore factory default configuration.
Syntax:
System Restore Default [keep_ip]
Parameters:
keep_ip: Keep IP configuration, default: Restore full configuration
Example:
To restore default value but not reset IP address:
Switch/>system restore default keep_ip
System Load
Description:
Show current CPU load: 100ms, 1s and 10s running average (in percent, zero is idle).
Syntax:
System Load