Planet MGSW-24160F - STP Tx Hold; STP Maxhops

User’s Manual of MGSW-24160F
416
Example:
Set the STP Bridge protocol version.
SWITCH/> stp version rstp
STP Tx Hold
Description:
Set or show the STP Bridge Transmit Hold Count parameter.
Syntax:
STP Txhold [<holdcount>]
Parameters:
<holdcount>: STP Transmit Hold Count (1-10)
Default Setting:
6
Example:
Set STP Tx hold in 10
SWITCH/>stp txhold 10
STP MaxHops
Description:
Set or show the MSTP Bridge Max Hop Count parameter.
Syntax:
STP MaxHops [<maxhops>]
Parameters:
<maxhops>: STP BPDU MaxHops (6-40))
Default Setting:
20