Planet MGSW-24160F - Do_Port_Alr; Do_Pwr_Alr

User’s Manual of MGSW-24160F
495
<hightolow>: Trigger -> high to low
<lowtohigh>: Trigger -> low to high
(default: Set or show digital input/output 1/2 trigger)
Example:
Enable digital output function and set trigger condition.
SWITCH/>dido do_en first enable hightolow
Do_port_alr
Description:
Set or show the system digital output1/2 port alarm.
Syntax:
dido do_port_alr [first|second] [<port_list>]
Parameters:
<first >: Digital input/output 1
<second>: Digital input/output 2
(default: Set or show digital input/output first(1)/second(2) select)
<port_list>: Port list or 'all', default: All ports
Example:
Set digital output port alarm.
SWITCH/>dido do_port_alr first all
SWITCH/>dido do_port_alr first 1,3,5
SWITCH/>dido do_port_alr first 1-10
Do_pwr_alr
Description:
Set or show the system digital output1/2 power alarm.
Syntax:
dido do_pwr_alr [first|second] [dc1|dc2|ac] [enable|disable]
Parameters:
<first >: Digital input/output 1
<second>: Digital input/output 2
(default: Set or show digital input/output first(1)/second(2) select)