User’s Manual of MGSW-24160F
181
: Click to undo any changes made locally and revert to previously saved values.
: Return to the previous page.
4.9.4 Port QoS Configuration
This page allows you to configure QoS settings for each port.
Frames can be classified by 4 different QoS classes are Low, Normal, Medium, and High.
The classification is controlled by a QCL that is assigned to each port.
A QCL consists of an ordered list of up to 12 QCEs.
Each QCE can be used to classify certain frames to a specific QoS class.
This classification can be based on parameters such as VLAN ID, UDP/TCP port, IPv4/IPv6 DSCP or Tag Priority.
Frames not matching any of the QCEs are classified to the default QoS class for the port.
The settings relate to the currently selected unit, as reflected by the page header.
The Port QoS Configuration screen in Figure 4-9-9 appears.