Plum MacBAT 5 - Device Sealing

B-15
MacBAT 5 – USER GUIDE. Version 1.0
Properly sealed device provides certainty of device integrity, warranty and quality. Each damaged seal can cause the device to be called
into questions due to plausible integrity violation.
There are two types of seals inside MacBAT 5 device.
MID required seal. Holographic seal with the EN12405-1 standard, which it refers to. Damaged or missing one of
these seals is the factor causing loss of MID conformity check.
Manufacturer seal. This seal is ensuring device was not manipulated. Warranty is void when this sticker is removed.
When the device is not assembled and certified with the MID conformity check all seals from above are replaced by
manufacturer seals.
Placement of the seals inside the MacBAT 5 devices.