E-6
MacBAT 5 – USER GUIDE. Version 1.0
Gas composition and algorithm settings can be uploaded to EVC through the keyboard.
To change the algorithm of compressibility factor calculation:
• Go to Main menu by pressing enter
• Navigate to menu Gas and conversion → Algorithm
• Press enter on parameter ConfAlgZ to choose one of available algorithms
Available options:
• SGERG-88
• AGA8-G1
• AGA8-G2
• AGA NX19-mod
• AGA8-92DC
• K1=const.
Every algorithm require setting gas composition in a next step. All of them except AGA8-92DC require basically simplified gas composition.
If there is no simplified gas composition for each of them it is possible to use full gas composition instead if provided.
In order to switch the gas composition from simplified to full it is necessary to perform action:
• Go to Main menu by pressing enter
• Navigate to menu Gas and conversion → Algorithm
• Press enter on parameter ConfSGS to change the value
Available options:
• Simpl. – converter will be using simplified gas composition for calculations
• Full comp. – converter will be using full gas composition for calculations
To Next Page
Loading...