Plum MacBAT 5 - SIM Card Installation - Optional

C-5
MacBAT 5 – USER GUIDE. Version 1.0
This step can be done in any moment, however it is recommended to do this in the beginning of the works. When the device is not
equipped with modem this step is skipped.
Required SIM card for the device must be size of MINI SIM which complies with ETSI TS 102221 v. 9.0.0 or Embedded-
SIM standards
1. Remove the battery B3 –
first from the left
2. Open the SIM tray by
sliding it left and lift it
3. Place the Mini SIM card
keeping its orientation
4. Close the tray, slide it
right and place back the
battery