Powerscreen XA750S - Setting the Speed of the Vibrating Feeder

20-14
F5F4
ok
3
3
ok
F6
4
4
MAXMIN
Crusher Operation
Setting the Speed of the Vibrating Feeder
1. The speed of the feeder will need adjusting,
depending upon the type of material being fed
into the plant, to maintain an even regular 󰘱ow
through the crusher.
2. The feeder speed can be set in plant mode,
display screen P10.
3. Scroll to highlight speed control for the vibrating
feeder using ‘ok’ knob or function buttons.
4. Select vibrating feeder speed control by either
pressing ‘ok’ or function button.