24-2
41
Daily Plant Checks
While it may not be the operator’s responsibility to
perform servicing or mechanical maintenance,
the operator must be thoroughly familiar with
the plant and its proper care since their own
safety is involved.
n DANGER
DO NOT allow an excavator bucket
feeding material into the hopper to pass
overhead or near the plant operator.
n WARNING
NEVER leave the plant unattended whilst
it is in operation.
Checks Prior to Daily Start
4. Perform all actions required in the lubrication
schedule requiring a daily check or lubrication,
refer to servicing - lubrication.
n WARNINGS
It is imperative that the operator carries
out regular and diligent checks before
operating the plant, especially with
operational safety in mind.
Always consider what particular safety
hazards could occur at specic sites and
eliminate them before commencing work.
Plant
1. Observe all safety warnings.
2. Visually check and inspect all guards, covers
and doors are in position and secure.
3. Check that all equipment and tools that are
hazardous to operation are removed from the
immediate site.
To Next Page
Loading...