31-5
Powerscreen® XA750
15
18
18
F6
ok
0
EN
18. Switch o product conveyor by either pressing
‘ok’ or function button.
19. The product conveyor icon and its running icon
will clear and it will stop.
20. The engine speed will reduce when all
components of the plant have stopped.
21. If the engine is not required further, stop the
engine as described in engine stop.
Final Preparation
22. It is recommended that at the end of operation
for the day the plant is routinely cleaned down
and thoroughly examined to check for any
damage, breakages, wear, leaks etcetera which
should be rectied before further operation.
NOTICE
Use of high pressure washing equipment
is to be avoided where the ingress
of water will be detrimental to plant
components. For example: crusher
bearings, conveyor bearings, hydraulic
tank, electrical equipment etcetera.
To Next Page
Loading...