40-5
02
1
0
2
1
Servicing Safety & Precautions
EN
Welding on a plant
NOTICES
Before welding on a plant, these
precautions shall be followed to protect
the electronic controls.
Refer also to any welding instruction label
inside the engine canopy.
2. Turn the battery disconnect switch o to the ‘0’
position and lockout.
n WARNING
Refer to Safety Notices Section for
relevant warning and procedure
LOCKOUT
PLANT
1. BEFORE WORKING ON THE PLANT, SWITCH
OFF, ‘LOCKOUT’ AND ‘TAG OUT’
3. Disconnect the battery ground negative [-]
battery cable at the battery and at the battery
disconnect switch.
To Next Page
Loading...