40-7
33
Servicing Safety & Precautions
EN
After Extensive Maintenance
Refer to initial checks - running in.
n WARNING
PRACTICE SAFE MAINTENANCE
Understand service procedure before
doing any work. Keep areas clean and
dry.
Never lubricate, clean, service or adjust
machine whilst it is moving.
Keep hands, feet and clothing clear of
power driven parts and in-running nip
points.
Disengage all the power and operate
controls to relieve pressure. Stop the
engine. Implement lockout procedure.
Allow machinery to cool.
Securely support any plant or machine
elements that must be raised for service
work.
Keep all parts in good condition and
properly installed. Attend to damage
immediately. Replace worn or broken
parts.
Remove any build up of grease, oil or
debris.
Disconnect battery ground cable,
negative, [-] at the battery and the
battery disconnect switch before making
adjustments on electrical systems or
welding.
To Next Page